Sandvik · Piezas de desgaste y repuestos de trituradora de cono ISO 9001 Certificado · Abastecimiento Directo
Wearing Plate
Números de pieza OEM compatibles: 452.1447-001
Wearing Plate
Modelo compatible
CH895
Aplicación
Installed on the crushing chamber wall/bowl liner of the cone crusher, directly withstanding ore squeezing, impact and abrasion, suitable for medium and fine crushing of medium-hard and harder ores
Notas de instalación
1. Before installation, check that mating surfaces are clean, free of burrs, deformation and cracks; 2. Tighten bolts uniformly in diagonal sequence to the specified torque; 3. After the first 8 hours of operation, stop and re-tighten once
Preguntas frecuentes
What is the normal service life of this wear part?
Under standard conditions (medium-hard ore, feed size ≤ specified value), the service life is typically 6-12 months. Actual life is affected by ore hardness, feed size, throughput and operation and maintenance levels.
How to determine when a wear part needs replacement?
Replace promptly when wear reaches 50%-70% of the original thickness, or when cracks, chipping, or crushing chamber profile deformation cause abnormal product size. Regularly stop for inspection and record wear data.
What should be noted when replacing wear parts?
Clean mating surfaces before replacement and check the base for deformation and cracks; after installing new parts, tighten diagonally to the specified torque and re-tighten after the first 8 hours of operation; re-adjust the crushing chamber gap after replacement.
Formulario de consulta
Complete el formulario y nuestro equipo le responderá en 24 horas con una cotización competitiva.