Sandvik · Pièces d'usure et de rechange pour concasseur à cône ISO 9001 Certifié · Approvisionnement Direct
Feed Hopper With Cone Complete
Numéros de pièce OEM compatibles: 442.7270-00
Feed Hopper With Cone Complete
Modèle compatible
CH440
Application
Forms the main support structure of the crusher, bearing the full working load and vibration, suitable for continuous heavy-load and high-vibration conditions
Notes d'installation
1. Use specified lifting points; single-point lifting is strictly prohibited to prevent deformation; 2. Clean the mating surfaces and tighten crosswise to the specified torque; 3. After installation, check levelness deviation ≤0.1mm/m
Questions fréquentes
How to handle cracks found in structural parts?
Stop the machine and evaluate immediately when cracks are found. Minor cracks on non-load-bearing surfaces can be repaired by professional welding (with preheating and post-heating); cracks in load-bearing zones or propagating cracks require replacement of the whole part. Operation with defects is prohibited.
How to ensure precision when installing structural parts?
Use specified lifting points to prevent deformation; clean mating surfaces and apply sealant; tighten crosswise in diagonal sequence to the specified torque; after installation, check levelness deviation ≤0.1mm/m and concentricity per technical requirements.
What are the daily maintenance points for structural parts?
Check daily for loose connection bolts; weekly check welds and stress concentration areas for cracks; monthly clean the anti-corrosion coating and touch up damaged areas; keep lubrication points supplied to avoid dry friction aggravating structural fatigue.
Formulaire de demande
Remplissez le formulaire ci-dessous et notre équipe vous répondra sous 24 heures avec un devis compétitif.