Sandvik · Peças de desgaste e reposição de britador cônico ISO 9001 Certificado · Abastecimento Direto
Rubber Lining, First Hole
Números de peça OEM compatíveis: 891.2846-901
Rubber Lining, First Hole
Modelo compatível
CH840
Aplicação
Used for vibration damping, cushioning and elastic overload compensation of the crusher, absorbing operating vibration and reducing structural fatigue to protect the frame and foundation
Notas de instalação
1. During installation, avoid eccentric load and shear; compression/tension must not exceed design travel; 2. Rubber parts must avoid contact with grease and solvents; 3. When replacing as a set, ensure consistent stiffness of all parts
Perguntas frequentes
What are the signs and causes of spring failure?
Signs: permanent deformation (shortened free length), fracture, stiffness loss, surface corrosion and cracks. Causes: overload, fatigue, corrosive environment, improper installation (eccentric loading), and material defects. Prevention: avoid over-travel compression, regularly check free length changes, and use anti-corrosion coating or stainless steel in corrosive environments.
How to evaluate whether a shock absorber needs replacement?
Replace the shock absorber when oil leakage, rubber cracking and aging, significantly reduced damping (slow or no rebound after pressing), or mounting seat cracks occur; normal service life is 3-5 years or 8000-12000 working hours; replace in pairs to ensure consistent damping.
What are the storage and usage precautions for rubber parts?
Store at 5-25°C with relative humidity ≤65%, avoid direct sunlight and ozone environment, keep away from heat sources and grease; shelf life is typically 2-3 years from the production date; avoid sharp objects and use special tools during installation; direct hammering is prohibited; different rubber materials (NBR/FKM/EPDM) differ in temperature and oil resistance and must not be mixed.
Formulário de cotação
Preencha o formulário abaixo e nossa equipe responderá em 24 horas com uma cotação competitiva.