Sandvik · Suku cadang aus & suku cadang crusher kerucut ISO 9001 Bersertifikat · Pasokan Langsung
Wearing Plate As. Kit
Nomor suku cadang OEM kompatibel: 452.4033-901
Wearing Plate As. Kit
Model kompatibel
CH895
Aplikasi
Installed on the crushing chamber wall/bowl liner of the cone crusher, directly withstanding ore squeezing, impact and abrasion, suitable for medium and fine crushing of medium-hard and harder ores
Catatan pemasangan
1. Before installation, check that mating surfaces are clean, free of burrs, deformation and cracks; 2. Tighten bolts uniformly in diagonal sequence to the specified torque; 3. After the first 8 hours of operation, stop and re-tighten once
Pertanyaan Umum
What is the normal service life of this wear part?
Under standard conditions (medium-hard ore, feed size ≤ specified value), the service life is typically 6-12 months. Actual life is affected by ore hardness, feed size, throughput and operation and maintenance levels.
How to determine when a wear part needs replacement?
Replace promptly when wear reaches 50%-70% of the original thickness, or when cracks, chipping, or crushing chamber profile deformation cause abnormal product size. Regularly stop for inspection and record wear data.
What should be noted when replacing wear parts?
Clean mating surfaces before replacement and check the base for deformation and cracks; after installing new parts, tighten diagonally to the specified torque and re-tighten after the first 8 hours of operation; re-adjust the crushing chamber gap after replacement.
Lebih banyak suku cadang di kategori ini
Formulir penawaran
Isi formulir di bawah dan tim kami akan merespons dalam 24 jam dengan penawaran kompetitif.