Filter Element 912.0114-00 - Aluminum Alloy 6061 Model cocok: CH550
Sandvik · Suku cadang aus & suku cadang crusher kerucut ISO 9001 Bersertifikat · Pasokan Langsung

Filter Element

Nomor suku cadang OEM kompatibel: 912.0114-00

Filter Element

Grade material
Aluminum Alloy 6061
Berat
3 kg
Kekerasan
HB 170-210
Dimensi
Ø150×450 mm
Sertifikasi
ISO 9001:2015; CE
Waktu pengiriman
20 hari
Garansi
12 months from date of shipment

Model kompatibel

CH550

Aplikasi

Used in the hydraulic adjustment, overload protection and lubrication supply systems of the crusher, providing power and lubrication for discharge opening adjustment and tramp iron release

Catatan pemasangan

1. Before assembly, clean pipelines and valves with clean diesel; flush the system until acceptable before filling oil; 2. Confirm all connection fittings are tightened without leakage; 3. Bleed air throughout no-load operation, then gradually raise pressure to rated value

Pertanyaan Umum

How to troubleshoot insufficient hydraulic system pressure?
Troubleshoot in sequence: check tank oil level and quality, check whether the pump suction line is leaking air, measure pump output pressure (to judge internal leakage), check whether the relief valve is stuck or set too low, check whether the cylinder seals are leaking internally, then check whether pipeline fittings have external leakage.
How to handle hydraulic cylinder leakage?
External leakage: check the piston rod surface for scratches and replace the wiper seal and main seal; internal leakage: check whether the piston seals are aged or damaged and replace the complete seal set; pay attention to installation direction and lubrication when replacing seals to avoid lip reversal; run no-load to bleed air after assembly.
What are the replacement cycle and requirements for hydraulic oil?
Replace every 2000 working hours or annually under normal conditions, with the first oil change at 500 hours; use anti-wear hydraulic oil meeting equipment requirements (e.g., L-HM46); clean the oil tank and pipelines and replace the filter element when changing oil; filter new oil before filling (precision ≥10μm) and regularly test oil contamination level.

Formulir penawaran

Isi formulir di bawah dan tim kami akan merespons dalam 24 jam dengan penawaran kompetitif.

Filter Element · 912.0114-00 · CH550
Minta penawaran WhatsApp