Sandvik · Cone Crusher Wear Parts & Spare Parts ISO 9001 Certified · Direct Factory Sourcing
Mantle Assembly
OEM Part Numbers Compatible: 452.2061-901
Mantle Assembly
Suitable Model
CH895
Application
Installed on the crushing chamber wall/bowl liner of the cone crusher, directly withstanding ore squeezing, impact and abrasion, suitable for medium and fine crushing of medium-hard and harder ores
Installation Notes
1. Before installation, check that mating surfaces are clean, free of burrs, deformation and cracks; 2. Tighten bolts uniformly in diagonal sequence to the specified torque; 3. After the first 8 hours of operation, stop and re-tighten once
FAQ
What is the normal service life of this wear part?
Under standard conditions (medium-hard ore, feed size ≤ specified value), the service life is typically 6-12 months. Actual life is affected by ore hardness, feed size, throughput and operation and maintenance levels.
How to determine when a wear part needs replacement?
Replace promptly when wear reaches 50%-70% of the original thickness, or when cracks, chipping, or crushing chamber profile deformation cause abnormal product size. Regularly stop for inspection and record wear data.
What should be noted when replacing wear parts?
Clean mating surfaces before replacement and check the base for deformation and cracks; after installing new parts, tighten diagonally to the specified torque and re-tighten after the first 8 hours of operation; re-adjust the crushing chamber gap after replacement.
Inquiry Form
Fill out the form below and our team will respond within 24 hours with a competitive quote.