Metso · Cone Crusher Wear Parts & Spare Parts ISO 9001 Certified · Direct Factory Sourcing
Switch Push Button
OEM Part Numbers Compatible: N02495145
Switch Push Button
Suitable Model
HP4
Application
Provides power drive, operation monitoring and electrical control functions for the crusher, ensuring safe and orderly operation
Installation Notes
1. Before wiring, verify the schematic diagram and wire numbers; terminals must be firmly crimped with no exposed copper; 2. After installation, measure insulation resistance ≥0.5MΩ and check grounding continuity; 3. Before energizing, jog to confirm correct rotation direction and limit actions
FAQ
What causes motor overheating and how to handle it?
Causes: overload, phase-loss operation, abnormal voltage, bearing damage, poor heat dissipation, and insulation aging. Handling: check current balance (deviation ≤10%), measure insulation resistance (≥0.5MΩ), check bearing temperature rise and lubrication, clean cooling air ducts; frequent overheating requires checking load matching and power supply quality.
How to diagnose abnormal sensor signals?
First check whether the supply voltage is normal, then check terminals for looseness and corrosion, then measure the output signal with a multimeter and compare with the actual value; for analog sensors check whether the 4-20mA or 0-10V output is linear; confirm whether it is a sensor fault or signal line/PLC module problem before replacing.
What is the daily maintenance for electrical cabinets?
Check daily the cabinet temperature (≤40°C) and fan operation; weekly clean the filter and cabinet dust (blow with compressed air after power-off); monthly check terminal tightness and contactor contact erosion; quarterly measure insulation resistance and grounding continuity (grounding resistance ≤4Ω).
Inquiry Form
Fill out the form below and our team will respond within 24 hours with a competitive quote.