Rear Frame MM0523830 - ZG270-500 Suitable Models: C120
Metso · Jaw Crusher Wear Parts & Spare Parts ISO 9001 Certified · Direct Factory Sourcing

Rear Frame

OEM Part Numbers Compatible: MM0523830

Rear Frame

Material Grade
ZG270-500
Weight
3000 kg
Hardness
HB 170-230
Dimensions
1800×1400×1000 mm
Certification
ISO 9001:2015
Lead Time
40 days
Warranty
12 months from date of shipment

Suitable Model

C120

Application

Main structural load-bearing component of the jaw crusher, withstanding high crushing forces and vibration loads during operation to ensure overall rigidity and operational stability.

Installation Notes

1. Before installation, verify the dimensions of mounting and mating surfaces; remove burrs, rust and debris; 2. Use proper lifting tools when positioning, avoid impact on joint surfaces, and align dowel pins and locating faces as marked; 3. Tighten bolts uniformly in 2-3 symmetrical passes to the designed torque, and re-check levelness and concentricity to meet assembly requirements.

FAQ

How to determine whether the frame can continue to be used if cracks are found?
First stop the machine and clean the crack surface; use dye penetrant or magnetic particle inspection to confirm the crack direction and length. If the crack does not extend to the main load-bearing rib plate and is short, it can be repaired by welding per procedure. If it penetrates the main load-bearing zone or deformation exceeds limits, the frame must be replaced.
What are the common causes of excessive temperature rise in the bearing housing?
Common causes include: insufficient or deteriorated lubricating oil, improper bearing clearance, excessive bearing housing concentricity deviation, seal failure allowing dust ingress, and poor cooling water flow. Check lubrication status, assembly precision and the cooling system item by item.
What causes abnormally large swing of the moving jaw (pitman)?
Usually caused by excessive wear clearance in eccentric shaft bearings, worn moving jaw bearing bushings, insufficient tie rod spring tension, or worn toggle plate and toggle plate seat. Measure each fit clearance and replace parts exceeding the limit.

Inquiry Form

Fill out the form below and our team will respond within 24 hours with a competitive quote.

Rear Frame · MM0523830 · C120
Request Quote WhatsApp