Metso · 反击式破碎机配件 合作工厂 ISO 9001 · 源头严选直供
反击条
替代 OEM 零件号: MM0202163
反击条——适用于Metso NP1110反击式破碎机，OEM 编号 MM0202163。强化重载设计，适用于高冲击破碎工况。材质：Mn18Cr2，硬度：180-220 HB。重量：120 千克。尺寸：1100 x 180 x 80 mm。针对砂岩、河卵石等高磨蚀性物料优化。
适用机型
NP1110
应用场景
Fit the hammer in the hammer bar seat and lock with hammer wedges and shims; always fit all hammers to the same wear level and balance the rotor; never weld or build up a high-chrome hammer.
安装说明
The high-chrome cast iron hammers are heat treated to 55-62 HRC and resist abrasive wear much better than manganese hammers.
常见问题
What is an impact bar?
It is a long manganese bar mounted in the impact throat to take the impact of thrown material and shield the frame from damage.
How does the impact bar differ from a breaker plate?
The breaker plate is the curved impact surface the material rebounds from; the impact bar is a straight protective bar across the throat / feed frame.
Can the impact bar be flipped to use the other side?
On most installations the impact bar can be reversed to use the unworn side before replacement; inspect the mounting slots first.
询价表单
填写以下表单，我们的团队将在24小时内为您提供有竞争力的报价。