Metso · 反击式破碎机配件 合作工厂 ISO 9001 · 源头严选直供
锥套
替代 OEM 零件号: MM0345841
锥套——适用于Metso NP13反击式破碎机，OEM 编号 MM0345841。标准工况设计，符合原厂规格。材质：C45 (45#) steel，硬度：220-260 HB。重量：8 千克。尺寸：180 x 120 x 120 mm。适用于标准给料条件下石灰石、煤炭、石膏的破碎。
适用机型
NP13
应用场景
Clean the tapered surfaces and apply light oil; tighten the clamping bolts evenly in a diagonal sequence until the required fit is achieved; mark the position for reassembly.
安装说明
No, the bushing is matched to a specific bore and taper series; provide the pulley part number or shaft diameter when ordering.
常见问题
How does the taper bushing lock the pulley?
The split tapered bushing is pulled into the pulley bore by the clamping bolts, compressing it radially onto the shaft to create a keyless press fit.
Can the same bushing fit different pulley bores?
No, the bushing is matched to a specific bore and taper series; provide the pulley part number or shaft diameter when ordering.
How do I remove a seized taper bushing?
Use the ejection/extracter threaded holes in the bushing, loosen the clamp bolts and screw the ejector bolts alternately to push the bushing out.
询价表单
填写以下表单，我们的团队将在24小时内为您提供有竞争力的报价。