Metso · 反击式破碎机配件 合作工厂 ISO 9001 · 源头严选直供
三角带
替代 OEM 零件号: 7003222290
三角带——适用于Metso NP13反击式破碎机，OEM 编号 7003222290。标准工况设计，符合原厂规格。材质：EPDM rubber，硬度：80-90 Shore A。重量：8 千克。尺寸：4200 x 22 x 14 mm。适用于标准给料条件下石灰石、煤炭、石膏的破碎。
适用机型
NP13
应用场景
Fit the whole matched set at once; release tension to fit, never pry belts on; tension to OEM deflection and re-check after the first day.
安装说明
No — replace the entire matched set so every groove shares the load equally; mixing old and new belts causes early failure.
常见问题
What material is the V-belt?
It is a reinforced EPDM rubber V-belt rated for high-power, shock-loaded crusher drives and temperature variation.
Should I replace belts one by one?
No — replace the entire matched set so every groove shares the load equally; mixing old and new belts causes early failure.
How do I set the correct belt tension?
Adjust the motor on its rails until the belt deflection under a standard push force matches the OEM value; re-tension after the first run-in hours.
询价表单
填写以下表单，我们的团队将在24小时内为您提供有竞争力的报价。